Morrison's Garage

The paint prep continues. The entire car has been sanded with 400-grit and some small dings on the passenger side filled. I also filled the...

I started sanding the body today. I'm using sanding pads with 400 grit dry sandpaper. Once I hit the paint with sandpaper I passed the ...

So today I installed the Koyorad radiator in the Miata and got the rest of the coolant hoses installed. I also finalized the routing of the...

Got this in from Good-Win Racing today. Nicely packaged to arrive safely. Beautifully made, very light, and should perform well. The M...

I found the issue with my transmission not wanting to mate to the engine. It was my fault. Using the transmission jack, I got the transmiss...

Today I installed the flywheel and clutch and dropped the engine in the car. But first... Here's my method for getting seals out. Fir...

I was a little premature in declaring the motor 'done'. In reality there were still a few tasks to take care of. I wanted to get as ...

Ok, I'm declaring the motor DONE. I got the oil pan reinstalled today. The front and rear gaskets cost me $4.50. They go on the curved ...

Before I pulled this engine I knew I had some serious oil leaks. I was getting drips on the garage floor and the whole bottom of the car was...

This weekend I concentrated on getting the engine together. The '99 head is going on the '94 short block. I had to install the valv...